Conquer Scientific Lab Equipment » General Laboratory Instruments

New Brunswick Scientific BIOFLO 4500 Fermentor/Bioreactor

keyvan — Mon, 26 Sep 2011 19:00:22 +0000

The BioFlo 4500 is an industrial fermentor/bioreactor with the power, versatility and advanced controls for microbial, insect and mammalian cell culture,in applications ranging from research through small-scale production. A wide array of options enable configuration to your individual process requirements, without the high cost and delays normally associated with purchasing a custom fermentor. The system’s most powerful feature is its advanced control capability, driven by NBS ML-6100™ multi-loop controller with touch-screen interface. With the ML-6100, on-screen entry of process control loops, sterilization cycles and calibration routines is remarkably intuitive, making the BioFlo 4500 exceptionally easy to operate. Almost any auxiliary process device, from sensors to biochemical analyzers, can be integrated with the fermentor without need for additional hardware, software or a service technician. In fact, every facet of this compact system has been designed with efficiency in mind. An open-frame design provides easy access to all piping, valves, regulators and filters; and assignable, peristaltic pumps with Easy-Load® pump heads speed tube loading. The system is fully cGMP compliant. For process flexibility and operating simplicity the BioFlo 4500 has no equal.

It comes with the roller cart, manuals and parts as pictured.

More info: http://www.al-tar.com/files/altarBrochures/flo4500%20.pdf

DuPont RiboPrinter Microbial Characterization System

keyvan — Thu, 22 Dec 2011 20:51:39 +0000

DuPont Qualicon Riboprinter Microbial Characterization System with HP/Compaq Computer. SN: 4290404.

Microbial Characterization System
Provides an Automated Genetic Snapshot of any Bacterial Strain in less than 8 hours
Provides Speed, Accuracy and Resolution needed to Identify Bacteria and then compare them at the strain level for efficient and consistent characterization
Original Cost $120,000.00

Thermo Finnigan EA 1112 Series Flash Elemental Analyzer with AS2000 Liquid and Solid Autosampler

conquersci — Wed, 28 Sep 2011 06:25:31 +0000

The products of combustion are sent through a packed chromatographic column. The column converts the products into combination of NO2,CO2,SO2,H2O. These simple compounds are then measured using a thermal conductivity detector.

The calibration is performed by analyzing standard compounds with K-factors calculations. The analysis of all elements in the CHNS/O group is performed simultaneously. Time of full analysis cycle is less than 10 minutes. The high precision micro scale has resolution of 0.1 microgram and works with samples of up to 4-5 milligram.

One interesting feature is special system of calculating the precise amount of Oxygen necessary for full combustion of the sample. The Oxygen is automatically cut at that pre-calculated amount. This feature helps to prolong the life of catalysts and reduce cost.

Thermo Finnigan EA 1112 Series Flash Elemental Analyzer

conquersci — Thu, 25 Aug 2011 09:20:09 +0000

Perkin Elmer 2400 II Series CHNS/O Elemental Analyzer with AD-6 Autobalance

conquersci — Thu, 25 Aug 2011 17:47:24 +0000

Includes AD-6 Autobalance.

CEM Discover Voyager Stop-Flow Synthesizer and Discover Explorer (24 position) Automated Reactor

conquersci — Thu, 25 Aug 2011 19:22:07 +0000

Includes:

1)Voyager Stop-Flow Synthesizers

Handles heterogeneous reaction mixtures
Uses 80-mL vessel
Use liquid, solid, or viscous reactants
Automated control and easy-to-use SW
Easily scale up reactions performed on the Discover or Explorer Systems
Built in intelligence for walk away/overnight runs (clog detector and auto clog resolution, liquid flow sensors, multiple leak detectors, overflow, vessel empty sensors)

2) Explorer – 24 position Automated Reactor

24-position system for 10-mL vessels
Footprint: 36 cm (15 in.)W x 52 cm (21 in.) D x 67 cm (27 in.) H

3) Pictured Accessories and certificate.

Perkin Elmer 2410 Series II Nitrogen Analyzer

conquersci — Thu, 25 Aug 2011 18:01:25 +0000

Includes lot of consumables.

Thermo Savant Discovery 220 Speedvac Concentrator Centrifuge

keyvan — Fri, 07 Oct 2011 21:52:35 +0000

In excellent condition and tested. It comes with Bosch modular cabinet and manual. It is listed for more than $80,000! Buy it for the fraction of list price.

Specifications:

High Capacity Unit That Holds up to 120 Standard 96-Well Microtitre Plates Per Run
Oversized Vacuum Port for Rapid Evaporation
Stainless Steel and Teflon Liquid Pathway for Maximum Durability and Solvent Compatibility
Vertical Chamber Cover Lift Mechanism for Easy Access of Samples
Built in Vacuum Control
Programmable Heat Range from Ambient up to 80°C
Unique “Scroll” Vacuum Pump is Oil-Free, Solvent and Corrosion-Resistant
High Capacity (7.5 Litre) -50°C Cold Trap
“Integrated Modular” Design Incorporates the Vacuum Pump and Cold Trap into One
Simple User Interface for Selecting Time, Temperature and Vacuum Level

The Discovery SpeedVac (Speed Vac) is a high capacity, high throughput centrifugal concentrator designed for combinatorial chemistry and its associated solvents. High quality components handle aggressive solvents such as TFA, Acetonitrile, DMSO, Methanol and Methylene Chloride. Interchangeable multi-level rotors can hold up to 120 shallow well microtiter plates or whole test tube racks in a single run. The compact design allows the complete unit to fit inside a conventional walk-in fume hood without modifications. A built-in 100 L/min oil-free, maintenance-free vacuum pump and a 7.5L capacity cold trap make it a complete, stand-alone system with plug-in and use convenience.

Affymetrix GeneChip Scanner 3000 System with AutoLoader

keyvan — Fri, 30 Sep 2011 22:41:54 +0000

Description

The GeneChip Scanner 3000 incorporates advanced design improvements with space-saving, speed, superior performance, and lower scanner-to-scanner variation to dramatically improve throughput and efficiency in your genetic analysis. This new scanner provides more accurate gridding and more consistent scanner-to-scanner biological performance, improving data integrity and data sharing between researchers. In addition, the GeneChip Scanner 3000 is designed to accommodate future advancements in GeneChip technology. Combined with the GeneChip Autoloader the GeneChip Scanner 3000 provides, sample tracking, temperature control and walk away freedom from scanning. This scanner is sold with a powerful computer workstation, loaded with GeneChip® Operating Software (GCOS). The purchase price includes a one-year service agreement and necessary upgrades.

Specifications:

Resolution: 2.5 µm and 1.5625 µm pixelation
Sample Format: Each array has a specific format : the array can be either 49, 64, 100 or 169

New Brunswick Scientific Innova 5000 Multi-Tier Shaker

conquersci — Thu, 06 Oct 2011 06:12:15 +0000

This industrial workhorse is designed to uniformly shake hundreds of samples, day-in and day-out, under the extreme conditions of an environmental room. New engineering concepts in load balancing minimize stress and vibrations, even when fully loaded and running at the maximum speed of 350 rpm. Innova 5000 accepts hundreds of samples on up to six accessory platforms. As pictured, platforms are cantilevered from a central column to provide easy access to all glassware, and lock in place without tools. The control module may be mounted centrally on the base (as shown) or may be wall mounted.

Advantages/Specifications:

Three-Tiered Shaker Simultaneously Agitates Hundreds of Samples on Up to Six Large-Capacity Platforms*
2″ (5.1 cm) circular orbit is that most commonly used in screening studies
Agitation 25 – 350 rpm, ±1 rpm
Cantilevered Platforms Provide Unobstructed Access to All Flasks. Accepts 10 mL to 4L flasks on lower two tiers; and flasks up to 6 L on the top tier
Removable Control Module Can Be Panel Mounted or Positioned Remotely Outside the Chamber. Fiber-optic link provides remote monitoring and control capability up to 100 ft. (30.5 m) away; eliminates both electrical “noise” interference as well as the need for bulky electrical wires
Precisely Balanced, Extremely Stable Shaker Mechanism with Massive Cast-Iron Base Need Not be Bolted to the Floor
Four Cushioned Idlers Mounted to the Corners of the Base Stabilize the Shaker, Ensure Uniform Motion without undue strain or structure fatigue
Designed with the Aid of Computer Stress Analysis Tests, the structure has been built to withstand a lifetime of continuous shaking regardless of the workload
Agitation is precisely maintained between 25 and 350 rpm even with line voltage fluctuations as high as ±10%
Cool-Running Motor has no appreciable affect on chamber temperature, making it well-suited to environmental rooms
Elimination of commutators and motor brushes minimize wear and maintenance
Optional Output Signal Can Be Provided for Recording Speed on an external chart recorder
Platform Size: 6 platforms, 32.5″ x 26.9″ (82.5 x 68 cm)
Orbit Diameter : 2″